ipcop support

Raqcop 2.0.1 is available as an update to 2.0.0. Just refresh your updates page in the web gui to see the update, download it via the green arrow icon and then hit apply, that's it!

If you still need to install Raqcop to your Cobalt or Symantec Velociraptor etc, install 2.0 first and then update.

_________________
Dave
http://www.raqcop.com
Sun Cobalt Raq4i AMD K6-III clocked at 550mhz LCD replaced with 16x2 Newhaven VFD and Rose Filter for white output.
Raqcop-2.0.6 Raid 1 with Two Transcend Industrial CF Drives and Syba adapters.
Traverse Pulsar ADSL PCI Card using DSLExtreme DSL
Cisco 1231 Access Point with both A and G radios installed attached to Blue.
---------------------------------------------------------------------------------------------
Test Boxes:
Cobalt Raq 550 with slower quieter fans, a stock Raq4i running 3G and WLAN AP.
Cobalt Raq3i upgraded to a K6-III clocked to 550mhz for testing, also running WLAN AP.
Qube 3, Another 550, Various Symantec Velociraptors (Raq4 yellow faceplate)